AYB Associated Yacht Brokers are pleased to present this
Southern Wind – 78 for just £2,206,750

Basic details

Length:24.08 m

Width:5.91 m

Draught:3.80 m

Year Built:2004

Comments

Model :RP/NAUTA 78’L.O.A. :23.95 Mt. Builder :Southern Wind Ship YardL.W.L. :20.50 Mt. Naval Arch.Reichel –PughBeam :5.91 Mt. Designer :NAUTA YACHTSDraft : 3.8 0 Mt. Concept :NAUTA YACHTSDisplacement :35.00 Ton. Year :2004Ballast :10.200 Kg. Engine:Yanmar 4LH STE 230 Hp. 2300@Sail Area : 348 ,00 M 2 Flag :ItalyCabins:3 Guest + 2 CrewConstructionComposite hull and deck by SP Technologies Drawing Booklet made in epoxy matrix under vacuum bag technique.Large use of kevlar and carbon give high mechanical and shock absorbing properties, while close cell foam core adds strength to the construction give thermal and acoustic insulation.The epoxy vacuum bag construction also guarantees an osmosis free underwater hull.All the bulkheads, including partition ones, are built in composite and fastened to hull and deck under vacuum bag technique.The result of this construction method is a very strong monolithic structure where each part of it contributes to the overall strength of the yacht, yet benefiting the quality of lightness, peculiarity of a composite construction.XKeel and Rudder12 Tons total ballast torpedo bulb and fin 3,80 Mt draft. The ballast bulb is in lead casting with antimony attached to a steel fin. Keel bolts are of high-tensile stainless steel. Steel fin is epoxy coated.A high aspect ratio spade rudder is built in composite on a carbon free rudder stock.Upper rudder bearing: Speedwave 180 mm Series 15Lower rudder bearing: Speedwave 260 mm Series 20The rudder stock is working on two self-aligning bearings which allow the rudder to work smoothly even when heavily loaded.XTeakCockpits floor, seats,deck coaming and all deck are covered with longitudinal teak planks of8mm thickness, 40 mm wide, 3 mm wide black rubber deck seals and margin frames in best yacht style including the deck cabin top surfaces.The toe rail is made in teak, for the whole length of the deck.XSteering systemTwin custom composite pedestal with roller bearings and twin wheels 6 double spokes carbon made 1100 mm diameter . Steering sprockets have 13 teeth and a pitch diameter of 79mm. Size 60 belt is the steering cables in Kevlar, 850mm diameter, twin grove quadrant in (E Glass/Kevlar) Composite.Two 125mm Steering Pedestal, in line with the Quadrant.XWinchesDeck gear is fitted to the deck with stainless steel through bolts, carbon backing plates, washers and nuts.The deck is fitted with the following deck Harken winches :N.2 1110 STA HY primary winch three speed, self-tailing hydraulic, aluminum drum.N.2 980 STA secondary winches two speed, self tailing, aluminum drum.N.2 66.3 STA HY halyard winch, three speed self tailing hydraulic.N.1 66.2 STA HY halyard winch. N.2 48.2 STA top lift/foreguy winch, two speed self tailing.STEMHEADAluminum pivoting anchor arm with roller and safety pin on a bow socket stowed in a dedicated bow deck locker.XCOMPANIONWAYS, PORTHOLES AND HATCHESAll the accessories has been mounted with stainless steel bolts and nuts.The sliding central cockpit companionway is built in 15 mm grey polycarbonate and mounted on stainless steel tracks, aft edge in teak handle shaped. The removable washboard is constructed from GRP and wood with stainless steel frames, sliding tracks and drainage. Recessed boxes on sides of the main companionway. Rondal Custom flush hatches with C. E. approval, teak frame, acrylic, all hinged type :  qtysize noDescription190 x 90 Sail locker360 x 60Buyer cabin and saloon235 x 50 N° 4 x 25 Mt., 20 mm. mooring linesN° 10 fenders with line.XPULPIT, PUSHPIT AND METALWORK30mm. diameter tube stainless steel pulpit with opening upper frame and supports for navigation lights.30mm. diameter tube stainless steelpushpit with supports for stern light and two teak and S.S. seats in the corners.N°18 tapered stainless steel stanchions h.700mm with through deck composite rod stanchion bases bonded to hull/deck. Stanchion fits tightly over the rod with fastener secure.N°2 Two side stainless steel opening gates.Stainless steel double, wire life lines connected with adjusting turnbuckles.N°4 stainless steel polished roller fairleads for mooring lines.FLOORBOARD Foam core plywood sandwich floorboards with teak and holly stripes veneer, opening lids in order to easily reach the sea cocks, handle with suction cap to open the floorboards.  The floorboards are completely surrounded. Floorboard and gratings in the showers and heads are made of plain unpainted teak.   Washer and dryer 5Kg installed aft of the workshop, front opening in the corridor. GALLEY AND DOMESTIC EQUIPMENTAlpes Inox stainless steel 4 burner gimballing stove, with adjustable potholders, gas oven and electric grill.Gas system with copper pipes and master valve in the galley, N°. 2 x 5-kg propane gas bottles. Bottles in aft cockpit dedicated locker with two valves for bottle selection .MIELE tumble dryer t 494 cMIELE washing machine Premeir novo FRIDGE AND FREEZERFrigomar refrigeration system with the following components:N. 3 compressor art 511, 24V 3000 rpm coupled to 3(2) hermetic motor compressor 220 V.N. 2 panel with lamps for levels, filters, two solenoids each.N. 2 electric panel for 220/24-V automatic switch.N. 2 cooling pumps one 24V and one 220V. N. 3 stainless steel custom built chilled boxes, standing fridge 180 liters with front opening and of 200 liters freezer with drawers, freezer box under galley bilge. Wine cooler in coffee table base. Chilled boxes insulated with 80 mm. P.U. foam, PVC coated inside and outside. All chilled boxes are fitted with resistors and seals on the doors as well as internal lights, hinges and closing handles. Freezer and fridge boxes chilled with accumulation eutectic plates fitted with single cooling coil. Three digital thermostat-thermometers mounted on a panel in the galley. Draining of the freezers and refrigerators has been realized by pipes and valves connected to the grey water tank in the galley. AIR CONDITIONINGCentral water-circulation air conditioning system with compressors installed in the engine room. Reversible Summer-Winter cycle. FRIGOMAR central air conditioning unit 39,000 BTU   HEADSAIL FURLING11068

Model :RP/NAUTA 78’L.O.A. :23.95 Mt. Builder :Southern Wind Ship YardL.W.L. :20.50 Mt. Naval Arch.Reichel –PughBeam :5.91 Mt. Designer :NAUTA YACHTSDraft : 3.8 0 Mt. Concept :NAUTA YACHTSDisplacement :35.00 Ton. Year :2004Ballast :10.200 Kg. Engine:Yanmar 4LH STE 230 Hp. 2300@Sail Area : 348 ,00 M 2 Flag :ItalyCabins:3 Guest + 2 CrewConstructionComposite hull and deck by SP Technologies Drawing Booklet made in epoxy matrix under vacuum bag technique.Large use of kevlar and carbon give high mechanical and shock absorbing properties, while close cell foam core adds strength to the construction give thermal and acoustic insulation.The epoxy vacuum bag construction also guarantees an osmosis free underwater hull.All the bulkheads, including partition ones, are built in composite and fastened to hull and deck under vacuum bag technique.The result of this construction method is a very strong monolithic structure where each part of it contributes to the overall strength of the yacht, yet benefiting the quality of lightness, peculiarity of a composite construction.XKeel and Rudder12 Tons total ballast torpedo bulb and fin 3,80 Mt draft. The ballast bulb is in lead casting with antimony attached to a steel fin. Keel bolts are of high-tensile stainless steel. Steel fin is epoxy coated.A high aspect ratio spade rudder is built in composite on a carbon free rudder stock.Upper rudder bearing: Speedwave 180 mm Series 15Lower rudder bearing: Speedwave 260 mm Series 20The rudder stock is working on two self-aligning bearings which allow the rudder to work smoothly even when heavily loaded.XTeakCockpits floor, seats,deck coaming and all deck are covered with longitudinal teak planks of8mm thickness, 40 mm wide, 3 mm wide black rubber deck seals and margin frames in best yacht style including the deck cabin top surfaces.The toe rail is made in teak, for the whole length of the deck.XSteering systemTwin custom composite pedestal with roller bearings and twin wheels 6 double spokes carbon made 1100 mm diameter . Steering sprockets have 13 teeth and a pitch diameter of 79mm. Size 60 belt is the steering cables in Kevlar, 850mm diameter, twin grove quadrant in (E Glass/Kevlar) Composite.Two 125mm Steering Pedestal, in line with the Quadrant.XWinchesDeck gear is fitted to the deck with stainless steel through bolts, carbon backing plates, washers and nuts.The deck is fitted with the following deck Harken winches :N.2 1110 STA HY primary winch three speed, self-tailing hydraulic, aluminum drum.N.2 980 STA secondary winches two speed, self tailing, aluminum drum.N.2 66.3 STA HY halyard winch, three speed self tailing hydraulic.N.1 66.2 STA HY halyard winch. N.2 48.2 STA top lift/foreguy winch, two speed self tailing.STEMHEADAluminum pivoting anchor arm with roller and safety pin on a bow socket stowed in a dedicated bow deck locker.XCOMPANIONWAYS, PORTHOLES AND HATCHESAll the accessories has been mounted with stainless steel bolts and nuts.The sliding central cockpit companionway is built in 15 mm grey polycarbonate and mounted on stainless steel tracks, aft edge in teak handle shaped. The removable washboard is constructed from GRP and wood with stainless steel frames, sliding tracks and drainage. Recessed boxes on sides of the main companionway. Rondal Custom flush hatches with C. E. approval, teak frame, acrylic, all hinged type :  qtysize noDescription190 x 90 Sail locker360 x 60Buyer cabin and saloon235 x 50 N° 4 x 25 Mt., 20 mm. mooring linesN° 10 fenders with line.XPULPIT, PUSHPIT AND METALWORK30mm. diameter tube stainless steel pulpit with opening upper frame and supports for navigation lights.30mm. diameter tube stainless steelpushpit with supports for stern light and two teak and S.S. seats in the corners.N°18 tapered stainless steel stanchions h.700mm with through deck composite rod stanchion bases bonded to hull/deck. Stanchion fits tightly over the rod with fastener secure.N°2 Two side stainless steel opening gates.Stainless steel double, wire life lines connected with adjusting turnbuckles.N°4 stainless steel polished roller fairleads for mooring lines.FLOORBOARD Foam core plywood sandwich floorboards with teak and holly stripes veneer, opening lids in order to easily reach the sea cocks, handle with suction cap to open the floorboards.  The floorboards are completely surrounded. Floorboard and gratings in the showers and heads are made of plain unpainted teak.   Washer and dryer 5Kg installed aft of the workshop, front opening in the corridor. GALLEY AND DOMESTIC EQUIPMENTAlpes Inox stainless steel 4 burner gimballing stove, with adjustable potholders, gas oven and electric grill.Gas system with copper pipes and master valve in the galley, N°. 2 x 5-kg propane gas bottles. Bottles in aft cockpit dedicated locker with two valves for bottle selection .MIELE tumble dryer t 494 cMIELE washing machine Premeir novo FRIDGE AND FREEZERFrigomar refrigeration system with the following components:N. 3 compressor art 511, 24V 3000 rpm coupled to 3(2) hermetic motor compressor 220 V.N. 2 panel with lamps for levels, filters, two solenoids each.N. 2 electric panel for 220/24-V automatic switch.N. 2 cooling pumps one 24V and one 220V. N. 3 stainless steel custom built chilled boxes, standing fridge 180 liters with front opening and of 200 liters freezer with drawers, freezer box under galley bilge. Wine cooler in coffee table base. Chilled boxes insulated with 80 mm. P.U. foam, PVC coated inside and outside. All chilled boxes are fitted with resistors and seals on the doors as well as internal lights, hinges and closing handles. Freezer and fridge boxes chilled with accumulation eutectic plates fitted with single cooling coil. Three digital thermostat-thermometers mounted on a panel in the galley. Draining of the freezers and refrigerators has been realized by pipes and valves connected to the grey water tank in the galley. AIR CONDITIONINGCentral water-circulation air conditioning system with compressors installed in the engine room. Reversible Summer-Winter cycle. FRIGOMAR central air conditioning unit 39,000 BTU   HEADSAIL FURLING11068

AYB/377063


Associated Yacht brokers,AYB,SAIL,Yacht for sale,Yachts for sale 2018-01-10 11:26:56

Please follow and like us:

Leave a Reply